|
|
|
 |
|
|
|
|
"Low
outgas, low metal elution & ion and antistatic
function" are essential for products for the
semiconductor industry. We have achieved our concept
"Development of Our Own Materials" by
establishing the original material brand, e-mateX®.
Material development and product design proposals
respond to industry specific speed and technological
change have been highly evaluated by customers. |
|
 |
|
|
|
|
|
|
|
|
|
|
|
e-mateX®
is a generic term for plastic materials developed
for semiconductors and LCD products by Fuji Bakelite,
and is a registered trademark. |
|
|
|
|
|
|
Paragon
is a generic term used for semiconductors and LCD
products in general by Fuji Bakelite. As PARAGON
is generally translated as "code, superb article
or gem," we have continued to develop products
to be models in the future semiconductor industry. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
| FB0220 Series |
|
|
|
|
 |
|
| [Characteristics] |
e-mateX®
FB-0220 Series is
a permanent antistatic
ABS material with
the ABS material synthesized
by a special polymerization
method and antistatic
material alloyed.
In particular, this
series has been developed
to provide low-cost
containers with superior
antistatic performance,
low outgas and rigidity
as a low-cost substitute
material for a permanent
antistatic PP material.
|
| [Recommended Applications] |
| In-Process
Carriers, In-Process
Storage Cases/Boxes |
|
|
|
|
|
| FB0430 Series |
|
|
|
|
 |
|
| [Characteristics] |
e-mateX®
FB-0430 Series is
an antistatic material
with cyclic olefin
material and special
carbon fiber specially
compounded, and has
been developed as
an upgraded material
of an antistatic PBT
material and a low-cost
material of a PEEK
material. As for its
[Characteristics], this
series has low outgas,
low ion elution, low
particle generation,
stable antistatic
performance and high
rigidity, and provides
low-cost containers
that offer performance
comparable to existing
antistatic PEEK containers.
|
| [Recommended Applications] |
| In-Process
Carriers, Various
In-Process Jigs |
|
|
|
|
|
| FB0530 Series |
|
|
|
|
 |
|
| [Characteristics] |
| e-mateX®FB-0530 Series is an antistatic material with polycarbonate material and special carbon fiber specially compounded. In particular, this series can respond to portions that require sliding wear characteristics and high strength, and has been developed to provide low-cost containers with superior antistatic performance, low outgas and rigidity. |
| [Recommended Applications] |
| In-Process
Containers (Body),
Various In-Process
Jigs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Carrier FB12A100 uses
e-mateX® FB-0430 and
is an upgraded carrier
of existing PP and
PBT materials. It
is recommended to
use this carrier especially
when problems occur
due to deformation
and particles on a
carrier of PP or PBT
material. This carrier
has superior dimension
stability and significantly
upgraded wear performance. |
|
|
|
|
|
| FB15A100 |
|
(antistatic
6 inch carrier) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Carrier FB15A100 uses
e-mateX® FB-0430 and
is an upgraded carrier
of the existing PP
and PBT materials.
It is recommended
to use this carrier
especially when problems
occur due to deformation
and particles on a
carrier of PP or PBT
material. This carrier
has superior dimension
stability and significantly
upgraded wear performance. |
|
|
|
|
|
| FB20A100 |
|
(antistatic
8inch carrier) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Carrier FB20A100 uses
e-mateX® FB-0430 and
is an upgraded carrier
of existing PP and
PBT. In particular,
miniaturization of
200mm line is advanced,
and it is recommended
to use this carrier when problems
occur due to deformation
on a carrier of PP
or PBT. This carrier
has superior dimension
stability and significantly
upgraded wear performance. |
|
|
|
|
|
| FB20A101 |
|
(antistatic
all-wall low-profile
carrier) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Carrier FB20A101 uses
e-mateX® FB-0430 and
has a low profile
shape, and the wall
surface is a full-wall
type. Using e-mateX®
FB-0430 enables the
suppression of deformation
that is a problem
with existing low
profile carriers. |
|
|
|
|
|
| FB20A102 |
|
(antistatic
8 inch carrier) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Carrier FB20A102 uses
e-mateX® FB-0430 and
is an upgraded carrier
of existing PP and
PBT materials. In
particular, miniaturization
of a 200mm line has
been advanced, and
it is recommended
to use this carrier when problems
occur due to deformation
and particles on a
carrier of PP and
PBT materials. This
carrier has superior
dimension stability
and a significantly
upgraded wear performance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FB12C000 |
|
(transparent
antistatic 5 inch
case) |
|
 |
|
|
|
 |
|
| [Characteristics] |
| Paragon
Case FB12C000 uses
e-mateX® FB-0212 for
the cover and e-mateX®
FB-0530 for the body,
and has been developed
to satisfy both requirements
of transparent antistatic
performance and lower
wear performance of
the body that no existing
cases of PP and PBT
materials can offer.
The front side of
the case opens wide
to make it easy to
eject and retract
a carrier. Also the
bar code label on
the U-wall of the
case can be read by
a reader without opening
the cover (please
confirm in advance).
Additionally, a plate
for a lot card can
be attached to the
top surface of the
case cover by welding.
Changing e-mateX® FB0212
to the transparent
colored type enables
distinction. |
|
|
|
|
|
| FB15C000 |
|
(transparent
antistatic 5 &
6 inch case) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Case FB15C000 uses
e-mateX® FB-0210 for
the cover and e-mateX®
FB-0530 for the body,
and has been developed
to satisfy both requirements
of transparent antistatic
performance and lower
wear performance of
the body that no existing
cases of PP and PBT
materials can offer.
The front side of
the case opens wide
to make it easy to
eject and retract
a carrier. Also the
bar code label on
the U-wall of the
case can be read by
a reader without opening
the cover (please
confirm in advance).
Additionally, a plate
for a lot card can
be attached to the
top surface of the
case cover by welding.
Changing e-mateX® FB0210
to the transparent
colored type enables
distinction. |
|
|
|
|
|
| FB20C000 |
|
(transparent
antistatic 8 inch
case) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Case FB20C000 uses
e-mateX® FB-0210 for
the cover and e-mateX®
FB-0530 for the body,
and has been developed
to satisfy both requirements
of transparent antistatic
performance and lower
wear performance of
the body that no existing
cases of PP and PBT
materials can offer.
The front side of
the case opens wide
to make it easy to
eject and retract
a carrier. Also the
bar code label on
the U-wall of the
case can be read by
a reader without opening
the cover (please
confirm in advance).
Additionally, a plate
for a lot card can
be attached to the
top surface of the
case cover by welding.
Changing e-mateX® FB0210
to the transparent
colored type enables
distinction. |
|
|
|
|
|
| FB20C001 |
|
(transparent
antistatic 8 inch
case) |
|
|
|
|
|
 |
|
| [Characteristics] |
| Paragon
Case FB20C001 uses
e-mateX® FB-0220 for
the cover and realizes
lower outgas than
the existing case
of PP material and
lower cost than PBT
material. The cover
is transparent by
using e-mateX® FB0210
Series to make it
possible to confirm
storage carriers.
Furthermore, using
e-mateX® FB-0530 for
the body enables a
decrease in wear of
the carrier leg. |
|
|
|
|
|
|
|
|
|
|
e-mateX®
Lineup
Contact
Us 